Pop Out Only the Faucet Holes You Need
Three faucet-hole covers ship seated in the deck, so a single-hole tap means popping one out with a screwdriver on install day, not drilling stainless.
Our Story
Renovators comparing install types get both from Lanxlic: a drop-in rim that covers the cutout you already have, and a heavier undermount body for stone. No product page tells you which one your countertop can actually take, and that answer decides the model more than the finish does.
Your cabinet opening decides more than your faucet does. Measure it before you shop: the heavier body sits under stone, the lighter one drops into the topmount cutout you already have. Each basin arrives with the template you cut to and a basket strainer. Pads on the walls kill the dishwashing clang, and a coating underneath keeps your shelf dry.
You have read the word premium on three steel pages this week without seeing a gauge printed once. Open any model here and the gauge prints on the page, 16 or 18, right beside the cabinet minimum and the bowl depth. Measure your base cabinet before anything else.
One renovator pulled a flexing big-box topmount off a granite counter and dropped the single-bowl model into the same opening. That P-trap went back on before dinner, with no fabricator bill for a re-template. Bowl layouts run single and double 50/50, so a narrow kitchen gets one wide basin and a busy one gets two. Thread your existing disposal onto the standard opening that same afternoon and the P-trap you already own goes back on unchanged.
Bowl depth runs 8 inches on the compact drop-in and 9 inches on the double, and that single figure decides whether a stockpot clears the tap on a Sunday braise. Every model prints its own number rather than a range, so you can stand your tallest pot on the counter tonight and picture it in the basin.
Buyers have left 92 verified reviews on the Lanxlic-branded basins, and the notes that repeat are practical ones: hard water shows spots on a deep bowl until you wipe it dry, and a garbage-disposal collar needs checking against the drain opening before install day. Those reports sit here beside the specs rather than behind them, because a renovator cutting stone once needs the whole picture before the saw runs.